Find a Service Center
- Solenoid Actuated Valve
- Solenoid Operated Operation
- D05 NFPA Size
- Double Solenoid
- 3-Position Spring Centered Function
description
- DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
- Port connections are made by mounting the valve on a manifold or subplate containing the interface.
- Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Port T Pressure Rating | 1000 psi |
| Response Type | Standard Response |
| Mechanical Options Code | None |
| Spool Spring Arrangement Code | C |
| Function | 3-Position Spring Centered |
| Center Position | All Ports Open |
| Surge Suppressor/Damper | None |
| Model No. | DG4S4-010C-D-60 |
| AC/DC | AC |
| Reducer Module | N/A |
| Manual Override | Plain Override |
| Tank Port Rating | 1000 |
| Body Material | Gray Iron |
| Performance | Standard Performance |
| Spool Code | 0 |
| Flow Direction Code | 4 |
| Coil Type Code | None |
| Compatible Fluids | Petroleum Oil |
| Cycle Rate [Max] | N/A |
| Pressure Port Check Valve Pressure | N/A |
| Port Restrictor Plugs | None |
| Response Time | 20 to 40 ms |
| Rated Flow [Max] | 24 gal/min |
| Actuator Type | Solenoid |
| Crossover | All Ports Open |
| Mounting | Subplate/Manifold Mount |
| Pilot Valve Type | N/A |
| Leakage | Standard Performance |
| Pressure [Max] | 4500 psi |
| Coil Type | Flying Leads |
| Solenoid | Double |
| Electrical Options Code | None |
| Mechanical Options | None |
| Electrical Options | None |
| Seal Material | Buna-N |
| Valve Type | Standard-Duty |
| Pilot/Drain | None |
| No. of Stages | Single Stage |
| Actuation Identification | Solenoid A, Solenoid B |
| Fluid Cleanliness | 19/17/14 micron |
| Electrical Connection | Lead Wires w/o Terminal Box |
| Voltage & Frequency | 220/240 VAC - 50/60 Hz |
| NFPA Size | D05 |
| Overrides | No Overrides |
| Temperature Range [Min] | 68 °F |
| Coil Rating Code | D |
| Operation | Solenoid Operated |
| Indicator Lights | No |
| Design No. | 60 |
| Temperature Range [Max] | 122 °F |
| Weight | 10.0 LB |
