Find a Service Center
- Solenoid Actuated Valve
- Solenoid Operated Operation
- D05 NFPA Size
- Double Solenoid
- 3-Position Spring Centered Function
description
- DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
- Port connections are made by mounting the valve on a manifold or subplate containing the interface.
- Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Pilot/Drain | None |
| Design No. | 60 |
| Rated Flow [Max] | 24 gal/min |
| Pressure [Max] | 4500 psi |
| Valve Type | Standard-Duty |
| Coil Rating Code | D |
| Operation | Solenoid Operated |
| Port T Pressure Rating | 1000 psi |
| Model No. | DG4S4-010C-D-60 |
| Leakage | Standard Performance |
| Crossover | All Ports Open |
| Solenoid | Double |
| Reducer Module | N/A |
| Manual Override | Plain Override |
| Indicator Lights | No |
| Compatible Fluids | Petroleum Oil |
| Tank Port Rating | 1000 |
| Pressure Port Check Valve Pressure | N/A |
| Flow Direction Code | 4 |
| NFPA Size | D05 |
| Coil Type | Flying Leads |
| Spool Spring Arrangement Code | C |
| AC/DC | AC |
| Electrical Options Code | None |
| No. of Stages | Single Stage |
| Voltage & Frequency | 220/240 VAC - 50/60 Hz |
| Temperature Range [Max] | 122 °F |
| Cycle Rate [Max] | N/A |
| Overrides | No Overrides |
| Seal Material | Buna-N |
| Pilot Valve Type | N/A |
| Body Material | Gray Iron |
| Function | 3-Position Spring Centered |
| Fluid Cleanliness | 19/17/14 micron |
| Actuator Type | Solenoid |
| Response Time | 20 to 40 ms |
| Actuation Identification | Solenoid A, Solenoid B |
| Port Restrictor Plugs | None |
| Surge Suppressor/Damper | None |
| Center Position | All Ports Open |
| Electrical Connection | Lead Wires w/o Terminal Box |
| Spool Code | 0 |
| Mechanical Options Code | None |
| Response Type | Standard Response |
| Performance | Standard Performance |
| Mounting | Subplate/Manifold Mount |
| Electrical Options | None |
| Mechanical Options | None |
| Temperature Range [Min] | 68 °F |
| Coil Type Code | None |
| Weight | 10.0 LB |
