Find a Service Center
- Pressure Control Valve
- Pressure Relief Valve Type
- RV1-10 Series
- Cartridge Only Port Size
- Cartridge Only Port Type
caution
- It is necessary to use a minimum of one flanged pulley to prevent the belt from riding off
- When the drive is operated on other than horizontal shafts, or when the center distance is greater than eight times the diameter of the smaller pulley on drive ratios less than 3:1, both pulleys should be flanged
- When a drive has three pulleys, at least two should be flanged
- If the drive has more than three pulleys, every other pulley should be flanged
| Pilot Ratio | 100:1 |
| Type | Pressure Relief Valve |
| Adjustment Type | Screw |
| Cavity | C-10-2 |
| Manufacturer Part No. | RV1-10-S-0-18/11 |
| Installation | Screw-in Cartridge |
| Cracking Pressure [Min] | 250 psi |
| Port Type | Cartridge Only |
| Body Type | 1 |
| Temperature Range [Min] | -40 °F |
| Series | RV1-10 |
| Recommend Filtration Level | 18/16/13 microns |
| Operating Pressure [Max] | 3046 psi |
| Cracking Pressure [Max] | 1800 psi |
| Housing Material | Cartridge Only |
| Flow [Max] | 8 gal/min |
| Temperature Range [Max] | 248 °F |
| Style | Poppet |
| Operation | Direct Acting |
| No. of Housing Ports | 2 |
| Valve Material | Cartridge only |
| Pressure [Max] | 3046 psi |
| Operating Pressure [Min] | 247 psi |
| Pressure Setting | 1023 psi |
| No. of Valve Ports | 2 |
| Seal Kit Buna | 565803 |
| Seal Kit Viton | 566086 |
| Seal Material | Buna-N |
| Leakage | 0.25 cc/min |
| Valve Torque into Cavity | 47 to 54 Nm |
| Port Size | Cartridge Only |
| Model No. | RV1-10-S-0-18/11 |
| Weight | 0.48 LB |
