Find a Service Center
- Pressure Control Valve
- Pressure Relief Valve Type
- RV1-10 Series
- Cartridge Only Port Size
- Cartridge Only Port Type
caution
- It is necessary to use a minimum of one flanged pulley to prevent the belt from riding off
- When the drive is operated on other than horizontal shafts, or when the center distance is greater than eight times the diameter of the smaller pulley on drive ratios less than 3:1, both pulleys should be flanged
- When a drive has three pulleys, at least two should be flanged
- If the drive has more than three pulleys, every other pulley should be flanged
| Cracking Pressure [Max] | 1800 psi |
| Pilot Ratio | 100:1 |
| Cavity | C-10-2 |
| Temperature Range [Min] | -40 °F |
| Port Type | Cartridge Only |
| Seal Kit Buna | 565803 |
| Leakage | 0.25 cc/min |
| Recommend Filtration Level | 18/16/13 microns |
| Pressure [Max] | 3046 psi |
| Adjustment Type | Screw |
| Body Type | 1 |
| Type | Pressure Relief Valve |
| Valve Material | Cartridge only |
| Installation | Screw-in Cartridge |
| No. of Housing Ports | 2 |
| Operating Pressure [Max] | 3046 psi |
| Pressure Setting | 1023 psi |
| Seal Material | Buna-N |
| Operating Pressure [Min] | 247 psi |
| Flow [Max] | 8 gal/min |
| Series | RV1-10 |
| Manufacturer Part No. | RV1-10-S-0-18/11 |
| Cracking Pressure [Min] | 250 psi |
| Model No. | RV1-10-S-0-18/11 |
| Port Size | Cartridge Only |
| Seal Kit Viton | 566086 |
| Style | Poppet |
| Temperature Range [Max] | 248 °F |
| Housing Material | Cartridge Only |
| Operation | Direct Acting |
| Valve Torque into Cavity | 47 to 54 Nm |
| No. of Valve Ports | 2 |
| Weight | 0.48 LB |
