These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Surge Suppressor/Damper Code
None
Coil Type Code
U
Function Code
6
Solenoid Indicator Lights Code
None
Port T Code
6
Rated Flow [Max]
21 gal/min
Operation
Solenoid Operated
Port Restrictor Plugs
None
Center Position
P Blocked, A & B to T
Crossover
P Blocked, A or B to T
Spool Shift Timing
N/A
Spool Spring Arrangement Code
C
Overrides
No Overrides
Port Restrictor Plug Code
None
Manual Override Option Code
H
Actuator Type
Solenoid
AC/DC
AC
Solenoid
Double
Electrical Connector Code
None
Seal Material
Buna-N
Solenoid Code
B
Mechanical Options
None
Reducer Module
N/A
Surge Suppressor/Damper
None
Function
3-Position Spring Centered
Pilot/Drain
None
EN Code
None
Pilot Valve Type
N/A
Voltage & Frequency
110/120 VAC – 50/60 Hz
Coil Type
DIN 43650
Housing Code
None
NFPA Size
D03
Cycle Rate [Max]
N/A
Spool Code
6
Spool Indicator Switch Code
None
Pressure [Max]
5075 psi
Port T Pressure Rating
3000 psi
Design No.
60
Electrical Connection
DIN 43650
Indicator Lights
No
Electrical Options
None
Response Type
Standard Response
Coil Rating Code
B
Solenoid Energization Code
V
Pressure Port Check Valve Pressure
N/A
Valve Type
High-Performance
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
