These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Crossover
P Blocked, A or B to T
Valve Type
High-Performance
Pilot Valve Type
N/A
Spool Indicator Switch Code
None
Operation
Solenoid Operated
Seal Material
Buna-N
Electrical Connector Code
None
Port Restrictor Plugs
None
Pressure Port Check Valve Pressure
N/A
Pressure [Max]
5075 psi
Rated Flow [Max]
21 gal/min
Port T Pressure Rating
3000 psi
Function Code
6
NFPA Size
D03
Center Position
P Blocked, A & B to T
Spool Spring Arrangement Code
C
Surge Suppressor/Damper Code
None
Mechanical Options
None
Function
3-Position Spring Centered
Solenoid
Double
Housing Code
None
Coil Type Code
U
Cycle Rate [Max]
N/A
EN Code
None
Indicator Lights
No
Actuator Type
Solenoid
Coil Rating Code
B
Electrical Connection
DIN 43650
Spool Code
6
Manual Override Option Code
H
AC/DC
AC
Electrical Options
None
Pilot/Drain
None
Solenoid Indicator Lights Code
None
Solenoid Energization Code
V
Spool Shift Timing
N/A
Coil Type
DIN 43650
Design No.
60
Overrides
No Overrides
Port T Code
6
Solenoid Code
B
Reducer Module
N/A
Voltage & Frequency
110/120 VAC – 50/60 Hz
Surge Suppressor/Damper
None
Response Type
Standard Response
Port Restrictor Plug Code
None
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
