These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Operation
Solenoid Operated
Coil Type Code
F
Spool Spring Arrangement Code
A
Pressure [Max]
5075 psi
Mechanical Options
None
Port T Pressure Rating
150 psi
Solenoid Energization Code
None
Spool Indicator Switch Code
S5
Rated Flow [Max]
21 gal/min
Surge Suppressor/Damper
None
Valve Type
High-Performance
Electrical Connection
Wired Terminal Block
Pressure Port Check Valve Pressure
N/A
Indicator Lights
Yes
Crossover
All Ports Blocked
Center Position
All Ports Blocked
Overrides
No Overrides
Response Type
Standard Response
Seal Material
Buna-N
Solenoid
Single
Pilot/Drain
None
Voltage & Frequency
24 VDC
Actuator Type
Solenoid
Solenoid Code
H
Housing Code
W
Port Restrictor Plug Code
None
AC/DC
DC
Pilot Valve Type
N/A
Port Restrictor Plugs
None
Spool Code
2
Manual Override Option Code
None
Port T Code
2
Design No.
60
EN Code
None
Surge Suppressor/Damper Code
None
NFPA Size
D03
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Reducer Module
N/A
Cycle Rate [Max]
N/A
Coil Rating Code
H
Function
2-Position Spring Offset, End to End
Electrical Options
None
Function Code
2
Electrical Connector Code
T
Spool Shift Timing
N/A
Solenoid Indicator Lights Code
L
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
