These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Function Code
2
Electrical Connection
Wired Terminal Block
AC/DC
DC
Solenoid Energization Code
None
Reducer Module
N/A
Spool Spring Arrangement Code
A
Operation
Solenoid Operated
Cycle Rate [Max]
N/A
Solenoid
Single
Port T Pressure Rating
150 psi
Spool Indicator Switch Code
S5
Pilot Valve Type
N/A
Pilot/Drain
None
Mechanical Options
None
Pressure Port Check Valve Pressure
N/A
Spool Shift Timing
N/A
Indicator Lights
Yes
Response Type
Standard Response
Seal Material
Buna-N
Pressure [Max]
5075 psi
Spool Code
2
Manual Override Option Code
None
Function
2-Position Spring Offset, End to End
Voltage & Frequency
24 VDC
Surge Suppressor/Damper Code
None
EN Code
None
NFPA Size
D03
Port T Code
2
Electrical Connector Code
T
Design No.
60
Valve Type
High-Performance
Housing Code
W
Center Position
All Ports Blocked
Surge Suppressor/Damper
None
Solenoid Indicator Lights Code
L
Coil Type Code
F
Coil Rating Code
H
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Solenoid Code
H
Overrides
No Overrides
Port Restrictor Plugs
None
Actuator Type
Solenoid
Crossover
All Ports Blocked
Electrical Options
None
Rated Flow [Max]
21 gal/min
Port Restrictor Plug Code
None
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
