These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Surge Suppressor/Damper
None
Voltage & Frequency
110/120 VAC – 50/60 Hz
Spool Indicator Switch Code
S5
Solenoid Indicator Lights Code
L
AC/DC
AC
Rated Flow [Max]
21 gal/min
Port Restrictor Plug Code
None
Function Code
2
Pressure [Max]
5075 psi
NFPA Size
D03
Electrical Connection
Wired Terminal Block
Solenoid
Single
Port Restrictor Plugs
None
Port T Code
2
EN Code
None
Indicator Lights
Yes
Response Type
Standard Response
Function
2-Position Spring Offset, End to End
Coil Type Code
F
Operation
Solenoid Operated
Spool Code
2
Design No.
60
Spool Spring Arrangement Code
A
Cycle Rate [Max]
N/A
Overrides
No Overrides
Seal Material
Buna-N
Spool Shift Timing
N/A
Center Position
All Ports Blocked
Solenoid Code
B
Reducer Module
N/A
Electrical Connector Code
T
Housing Code
W
Mechanical Options
None
Solenoid Energization Code
None
Crossover
All Ports Blocked
Valve Type
High-Performance
Manual Override Option Code
None
Electrical Options
None
Pressure Port Check Valve Pressure
N/A
Coil Rating Code
B
Actuator Type
Solenoid
Surge Suppressor/Damper Code
None
Port T Pressure Rating
150 psi
Pilot Valve Type
N/A
Pilot/Drain
None
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back