These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Spool Code
2
Surge Suppressor/Damper Code
None
Pilot Valve Type
N/A
Indicator Lights
Yes
Solenoid Indicator Lights Code
L
Reducer Module
N/A
Crossover
All Ports Blocked
Solenoid Energization Code
None
Pressure [Max]
5075 psi
NFPA Size
D03
Electrical Options
None
Solenoid
Single
Spool Indicator Switch Code
S5
Center Position
All Ports Blocked
Operation
Solenoid Operated
Manual Override Option Code
None
Port T Pressure Rating
150 psi
Overrides
No Overrides
EN Code
None
Voltage & Frequency
110/120 VAC – 50/60 Hz
Electrical Connector Code
T
Seal Material
Buna-N
Actuator Type
Solenoid
Surge Suppressor/Damper
None
Coil Rating Code
B
Port Restrictor Plug Code
None
Housing Code
W
Response Type
Standard Response
Rated Flow [Max]
21 gal/min
AC/DC
AC
Cycle Rate [Max]
N/A
Mechanical Options
None
Spool Shift Timing
N/A
Coil Type Code
F
Spool Spring Arrangement Code
A
Pilot/Drain
None
Design No.
60
Solenoid Code
B
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Pressure Port Check Valve Pressure
N/A
Valve Type
High-Performance
Electrical Connection
Wired Terminal Block
Port T Code
2
Function
2-Position Spring Offset, End to End
Function Code
2
Port Restrictor Plugs
None
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back