These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Housing Code
None
Voltage & Frequency
220 VAC – 50 Hz
Seal Material
Buna-N
Cycle Rate [Max]
N/A
EN Code
None
Solenoid
Double
Surge Suppressor/Damper
None
Actuator Type
Solenoid
Overrides
No Overrides
Crossover
All Ports Open
Surge Suppressor/Damper Code
None
Port Restrictor Plug Code
None
Operation
Solenoid Operated
Mechanical Options
None
Pressure [Max]
5075 psi
Solenoid Energization Code
None
Pressure Port Check Valve Pressure
N/A
Spool Shift Timing
N/A
Coil Type Code
U
Pilot Valve Type
N/A
Spool Spring Arrangement Code
C
AC/DC
AC
NFPA Size
D03
Spool Indicator Switch Code
None
Pilot/Drain
None
Electrical Options
None
Function Code
0
Port T Code
6
Response Type
Standard Response
Electrical Connection
DIN 43650
Spool Code
0
Coil Rating Code
C
Electrical Connector Code
None
Center Position
All Ports Open
Port T Pressure Rating
3000 psi
Manual Override Option Code
H
Rated Flow [Max]
21 gal/min
Solenoid Code
C
Function
3-Position Spring Centered
Reducer Module
N/A
Coil Type
DIN 43650
Indicator Lights
No
Design No.
60
Solenoid Indicator Lights Code
None
Port Restrictor Plugs
None
Valve Type
High-Performance
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
