These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Reducer Module
N/A
Rated Flow [Max]
21 gal/min
Coil Rating Code
C
EN Code
None
Actuator Type
Solenoid
Manual Override Option Code
H
Center Position
All Ports Open
Crossover
All Ports Open
Surge Suppressor/Damper Code
None
Seal Material
Buna-N
Mechanical Options
None
Cycle Rate [Max]
N/A
Overrides
No Overrides
Solenoid Energization Code
None
Design No.
60
Electrical Options
None
Pressure [Max]
5075 psi
Electrical Connection
DIN 43650
Housing Code
None
Solenoid
Double
NFPA Size
D03
Electrical Connector Code
None
Operation
Solenoid Operated
Solenoid Code
C
Port Restrictor Plug Code
None
Coil Type Code
U
Spool Indicator Switch Code
None
Pilot/Drain
None
Spool Code
0
Spool Shift Timing
N/A
Pressure Port Check Valve Pressure
N/A
Response Type
Standard Response
Voltage & Frequency
220 VAC – 50 Hz
Indicator Lights
No
Port T Pressure Rating
3000 psi
Valve Type
High-Performance
Surge Suppressor/Damper
None
Spool Spring Arrangement Code
C
Port T Code
6
Function Code
0
AC/DC
AC
Function
3-Position Spring Centered
Coil Type
DIN 43650
Pilot Valve Type
N/A
Port Restrictor Plugs
None
Solenoid Indicator Lights Code
None
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
