These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Manual Override Option Code
None
Operation
Solenoid Operated
Response Type
Standard Response
NFPA Size
D03
Surge Suppressor/Damper
None
Function Code
0
Port Restrictor Plug Code
None
Spool Shift Timing
N/A
Port Restrictor Plugs
None
Mechanical Options
None
Electrical Options
None
Reducer Module
N/A
Pressure [Max]
5075 psi
Electrical Connection
DIN 43650
Surge Suppressor/Damper Code
None
Port T Code
7
Seal Material
Buna-N
Pilot Valve Type
N/A
Spool Indicator Switch Code
None
Pilot/Drain
None
Rated Flow [Max]
21 gal/min
Solenoid Code
H
Center Position
All Ports Open
Spool Code
0
EN Code
None
Solenoid Energization Code
V
Coil Type
DIN 43650
Actuator Type
Solenoid
Port T Pressure Rating
3000 psi
Solenoid Indicator Lights Code
None
AC/DC
DC
Valve Type
High-Performance
Overrides
No Overrides
Indicator Lights
No
Coil Type Code
U
Pressure Port Check Valve Pressure
N/A
Function
2-Position Spring Offset, End to Center
Electrical Connector Code
None
Solenoid
Single
Crossover
All Ports Open
Housing Code
None
Voltage & Frequency
24 VDC
Coil Rating Code
H
Cycle Rate [Max]
N/A
Spool Spring Arrangement Code
BL
Design No.
60
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
