These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Voltage & Frequency
24 VDC
Overrides
No Overrides
Pressure Port Check Valve Pressure
N/A
Pilot/Drain
None
Spool Spring Arrangement Code
BL
Valve Type
High-Performance
Port T Pressure Rating
3000 psi
Reducer Module
N/A
Coil Type
DIN 43650
Coil Type Code
U
Center Position
All Ports Open
Solenoid Indicator Lights Code
None
Solenoid
Single
Housing Code
None
Surge Suppressor/Damper Code
None
Spool Indicator Switch Code
None
Actuator Type
Solenoid
Electrical Connector Code
None
Surge Suppressor/Damper
None
Pressure [Max]
5075 psi
Solenoid Code
H
Function Code
0
Rated Flow [Max]
21 gal/min
EN Code
None
Cycle Rate [Max]
N/A
Electrical Connection
DIN 43650
Function
2-Position Spring Offset, End to Center
Design No.
60
Response Type
Standard Response
Spool Code
0
AC/DC
DC
Electrical Options
None
Seal Material
Buna-N
NFPA Size
D03
Pilot Valve Type
N/A
Port T Code
7
Crossover
All Ports Open
Port Restrictor Plug Code
None
Manual Override Option Code
None
Indicator Lights
No
Port Restrictor Plugs
None
Solenoid Energization Code
V
Coil Rating Code
H
Operation
Solenoid Operated
Spool Shift Timing
N/A
Mechanical Options
None
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
