Find a Service Center
- D05 Single Solenoid Operated Valve
- 12 VDC
- DIN 43650
- DIN 43650
- 2-Position Spring Offset
description
- DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
- Port connections are made by mounting the valve on a manifold or subplate containing the interface.
- Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Mechanical Options | None |
| Operation | Solenoid Operated |
| Seal Material | Buna-N |
| Mechanical Options Code | None |
| Flow Direction Code | 4 |
| Pressure [Max] | 3600 psi |
| Valve Type | Standard-Duty |
| Rated Flow [Max] | 25 gal/min |
| Spool Spring Arrangement Code | A |
| Port Restrictor Plugs | None |
| Electrical Options | None |
| Coil Type Code | U |
| Electrical Options Code | None |
| Coil Type | DIN 43650 |
| Voltage & Frequency | 12 VDC |
| Spool Code | 2 |
| Crossover | All Ports Blocked |
| Design No. | 60 |
| NFPA Size | D05 |
| Pilot/Drain | None |
| Overrides | No Overrides |
| Solenoid | Single |
| Center Position | All Ports Blocked |
| Port T Pressure Rating | 1000 psi |
| Cycle Rate [Max] | N/A |
| Response Type | Standard Response |
| Function | 2-Position Spring Offset |
| Surge Suppressor/Damper | None |
| Pressure Port Check Valve Pressure | N/A |
| Electrical Connection | DIN 43650 |
| Coil Rating Code | G |
| AC/DC | DC |
| Indicator Lights | No |
| Pilot Valve Type | N/A |
| Reducer Module | N/A |
| Actuator Type | Solenoid |
| Weight | 10.0 LB |
