Find a Service Center
- D05 Single Solenoid Operated Valve
- 12 VDC
- DIN 43650
- DIN 43650
- 2-Position Spring Offset
description
- DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
- Port connections are made by mounting the valve on a manifold or subplate containing the interface.
- Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Coil Type Code | U |
| Mechanical Options Code | None |
| Port Restrictor Plugs | None |
| Coil Rating Code | G |
| Pilot/Drain | None |
| Center Position | All Ports Blocked |
| Mechanical Options | None |
| Cycle Rate [Max] | N/A |
| Function | 2-Position Spring Offset |
| Operation | Solenoid Operated |
| Electrical Connection | DIN 43650 |
| Overrides | No Overrides |
| Voltage & Frequency | 12 VDC |
| Spool Spring Arrangement Code | A |
| AC/DC | DC |
| Electrical Options | None |
| Actuator Type | Solenoid |
| NFPA Size | D05 |
| Port T Pressure Rating | 1000 psi |
| Pilot Valve Type | N/A |
| Indicator Lights | No |
| Pressure Port Check Valve Pressure | N/A |
| Coil Type | DIN 43650 |
| Spool Code | 2 |
| Flow Direction Code | 4 |
| Surge Suppressor/Damper | None |
| Seal Material | Buna-N |
| Reducer Module | N/A |
| Electrical Options Code | None |
| Response Type | Standard Response |
| Pressure [Max] | 3600 psi |
| Solenoid | Single |
| Valve Type | Standard-Duty |
| Crossover | All Ports Blocked |
| Rated Flow [Max] | 25 gal/min |
| Design No. | 60 |
| Weight | 10.0 LB |
