868850

Vickers SystemStak™ Single Relief Valve

Item #101922965

15 gal/min Flow Rate

+ Show More

Auto Replenish

each One-time purchase

Product Details

Relief valves limit the maximum pressure in a system. These are mainly used to prevent high pressures from damaging system components and provide a path to reservoir. When these valves are used with a pressure-compensated pump, the pressure should be set approximately 10% higher than the pump compensator. Cross port relief valves are mainly used in motor circuits to prevent over pressurization. Sequence valves allow fluid to pass once the inlet pressure to the valve reaches the preset pressure. Pressure-reducing valves only allow pressure to pass up to the preset level. These valves are ideal to reduce the pressure in a particular circuit requiring a lower pressure.

Have all the internal passages necessary to serve the directional valve topping them
Mounting surfaces and port patterns are international standards

Specifications

Compatible Fluids	Petroleum Oil
Fluid Cleanliness	20/18/15 micron
Performance	Standard Performance
Operating Pressure [Max]	4500 psi
Pressure Adjustment Range (psi)	60 to 725
Pressure Limited In, Dual	N/A
Flow [Max]	32 gal/min
Leakage	Standard
Gauge Port Thread Type	SAE
Temperature Range [Max]	176 °F
Temperature Range [Min]	32 °F
Manufacturer Part No.	DGMC-5-PT-AW-S-30
Pressure Limited In	Pressure Port
External Drain, Dual	N/A
Port Drained Into	Tank Port
Adjustment Type	Screw
Valve Mount Type	Subplate/Manifold Mounted
Actuation Option	Proportional
External Drain	No
Pressure [Max]	4500 psi
Gage Port	SAE-4
Body Material	Cast Iron
Seal Material	Buna-N
Family Name	Vickers D05 SystemStak™ Valves
Design No.	30
Relief Function	Single
No. of Stages	Single Stage
Interface	D05
Port Drained Into, Dual	N/A
Valve Type	Relief Valve "P" to "T"
Remote Control Port	No
Pressure Adjustment Range, Dual (psi)	N/A
Adjustment Type, Dual	N/A
Model No.	DGMC-5-PT-AW-S-30
Adjustment	Yes
Weight	6.5 LB