868850

Vickers SystemStak™ Single Relief Valve

Item #101922965

15 gal/min Flow Rate

+ Show More

Auto Replenish

each One-time purchase

Product Details

Relief valves limit the maximum pressure in a system. These are mainly used to prevent high pressures from damaging system components and provide a path to reservoir. When these valves are used with a pressure-compensated pump, the pressure should be set approximately 10% higher than the pump compensator. Cross port relief valves are mainly used in motor circuits to prevent over pressurization. Sequence valves allow fluid to pass once the inlet pressure to the valve reaches the preset pressure. Pressure-reducing valves only allow pressure to pass up to the preset level. These valves are ideal to reduce the pressure in a particular circuit requiring a lower pressure.

Have all the internal passages necessary to serve the directional valve topping them
Mounting surfaces and port patterns are international standards

Specifications

Manufacturer Part No.	DGMC-5-PT-AW-S-30
Port Drained Into	Tank Port
Leakage	Standard
Flow [Max]	32 gal/min
Relief Function	Single
Adjustment Type, Dual	N/A
Gauge Port Thread Type	SAE
External Drain, Dual	N/A
External Drain	No
No. of Stages	Single Stage
Operating Pressure [Max]	4500 psi
Pressure Limited In, Dual	N/A
Seal Material	Buna-N
Pressure [Max]	4500 psi
Fluid Cleanliness	20/18/15 micron
Pressure Limited In	Pressure Port
Body Material	Cast Iron
Compatible Fluids	Petroleum Oil
Remote Control Port	No
Pressure Adjustment Range, Dual (psi)	N/A
Actuation Option	Proportional
Design No.	30
Valve Type	Relief Valve "P" to "T"
Port Drained Into, Dual	N/A
Interface	D05
Performance	Standard Performance
Model No.	DGMC-5-PT-AW-S-30
Gage Port	SAE-4
Family Name	Vickers D05 SystemStak™ Valves
Adjustment Type	Screw
Temperature Range [Min]	32 °F
Valve Mount Type	Subplate/Manifold Mounted
Pressure Adjustment Range (psi)	60 to 725
Adjustment	Yes
Temperature Range [Max]	176 °F
Weight	6.5 LB