Find a Service Center
- D05 Double Solenoid Operated Valve
- 115 VAC - 60 Hz
- Ground Terminal
- No Coil
- 3-Position Detented
description
- DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
- Port connections are made by mounting the valve on a manifold or subplate containing the interface.
- Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Voltage & Frequency | 115 VAC – 60 Hz |
| Pilot Valve Type | N/A |
| Pressure [Max] | 3000 psi |
| NFPA Size | D05 |
| Indicator Lights | Yes |
| AC/DC | AC |
| Seal Material | Buna-N |
| Flow Direction Code | 4 |
| Port Restrictor Plugs | None |
| Response Type | Standard Response |
| Electrical Options Code | L |
| Coil Rating Code | None |
| Pilot/Drain | None |
| Mechanical Options | None |
| Crossover | All Ports Blocked |
| Solenoid Air Gap Code | None |
| Design No. | 51 |
| Coil Type | No Coil |
| Spool Code | 2 |
| Mechanical Options Code | None |
| Spool Spring Arrangement Code | N |
| Solenoid | Double |
| Function | 3-Position Detented |
| Rated Flow [Max] | 20 gal/min |
| Actuator Type | Solenoid |
| Valve Type | Standard-Duty |
| Overrides | No Overrides |
| Electrical Options | None |
| Center Position | All Ports Blocked |
| Pressure Port Check Valve Pressure | N/A |
| Cycle Rate [Max] | N/A |
| Electrical Connection | Ground Terminal |
| Surge Suppressor/Damper | None |
| Port T Pressure Rating | 1000 psi |
| Operation | Solenoid Operated |
| Reducer Module | N/A |
| Weight | 10.0 LB |
