Find a Service Center
- D05 Double Solenoid Operated Valve
- 115 VAC - 60 Hz
- Ground Terminal
- No Coil
- 3-Position Detented
description
- DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
- Port connections are made by mounting the valve on a manifold or subplate containing the interface.
- Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Valve Type | Standard-Duty |
| Spool Spring Arrangement Code | N |
| Surge Suppressor/Damper | None |
| Operation | Solenoid Operated |
| AC/DC | AC |
| Coil Type | No Coil |
| Reducer Module | N/A |
| Cycle Rate [Max] | N/A |
| Voltage & Frequency | 115 VAC – 60 Hz |
| Crossover | All Ports Blocked |
| Coil Rating Code | None |
| Electrical Options | None |
| Pilot Valve Type | N/A |
| Pressure [Max] | 3000 psi |
| Seal Material | Buna-N |
| Electrical Connection | Ground Terminal |
| Actuator Type | Solenoid |
| Solenoid Air Gap Code | None |
| Center Position | All Ports Blocked |
| Pilot/Drain | None |
| Response Type | Standard Response |
| Overrides | No Overrides |
| Function | 3-Position Detented |
| Indicator Lights | Yes |
| Solenoid | Double |
| Port T Pressure Rating | 1000 psi |
| Mechanical Options Code | None |
| Rated Flow [Max] | 20 gal/min |
| NFPA Size | D05 |
| Spool Code | 2 |
| Mechanical Options | None |
| Port Restrictor Plugs | None |
| Electrical Options Code | L |
| Design No. | 51 |
| Flow Direction Code | 4 |
| Pressure Port Check Valve Pressure | N/A |
| Weight | 10.0 LB |
