Find a Service Center
- D05 Double Solenoid Operated Valve
- 220 VAC - 50 Hz
- Ground Terminal
- No Coil
- 3-Position Spring Centered
description
- DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
- Port connections are made by mounting the valve on a manifold or subplate containing the interface.
- Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Reducer Module | N/A |
| Pressure [Max] | 3000 psi |
| Voltage & Frequency | 220 VAC – 50 Hz |
| Crossover | P Blocked, A or B to T |
| NFPA Size | D05 |
| Center Position | P Blocked, A & B to T |
| Flow Direction Code | 4 |
| AC/DC | AC |
| Function | 3-Position Spring Centered |
| Mechanical Options | None |
| Rated Flow [Max] | 20 gal/min |
| Cycle Rate [Max] | N/A |
| Pilot/Drain | None |
| Overrides | No Overrides |
| Operation | Solenoid Operated |
| Spool Code | 6 |
| Electrical Options Code | None |
| Solenoid | Double |
| Solenoid Air Gap Code | None |
| Pressure Port Check Valve Pressure | N/A |
| Port T Pressure Rating | 1000 psi |
| Indicator Lights | No |
| Valve Type | Standard-Duty |
| Actuator Type | Solenoid |
| Surge Suppressor/Damper | None |
| Seal Material | Buna-N |
| Coil Type | No Coil |
| Electrical Options | None |
| Response Type | Standard Response |
| Coil Rating Code | None |
| Electrical Connection | Ground Terminal |
| Design No. | 50 |
| Port Restrictor Plugs | None |
| Mechanical Options Code | None |
| Spool Spring Arrangement Code | C |
| Pilot Valve Type | N/A |
| Weight | 10.0 LB |
