Find a Service Center
- D05 Double Solenoid Operated Valve
- 220 VAC - 50 Hz
- Ground Terminal
- No Coil
- 3-Position Spring Centered
description
- DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
- Port connections are made by mounting the valve on a manifold or subplate containing the interface.
- Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Electrical Connection | Ground Terminal |
| Electrical Options Code | None |
| Mechanical Options Code | None |
| Reducer Module | N/A |
| Rated Flow [Max] | 20 gal/min |
| Valve Type | Standard-Duty |
| Pressure Port Check Valve Pressure | N/A |
| Flow Direction Code | 4 |
| Center Position | P Blocked, A & B to T |
| Mechanical Options | None |
| Cycle Rate [Max] | N/A |
| Overrides | No Overrides |
| Coil Rating Code | None |
| Solenoid | Double |
| Solenoid Air Gap Code | None |
| Coil Type | No Coil |
| AC/DC | AC |
| Pressure [Max] | 3000 psi |
| Pilot/Drain | None |
| Design No. | 50 |
| Function | 3-Position Spring Centered |
| Response Type | Standard Response |
| Indicator Lights | No |
| Voltage & Frequency | 220 VAC – 50 Hz |
| Surge Suppressor/Damper | None |
| Spool Spring Arrangement Code | C |
| Crossover | P Blocked, A or B to T |
| Operation | Solenoid Operated |
| Actuator Type | Solenoid |
| Pilot Valve Type | N/A |
| Spool Code | 6 |
| Seal Material | Buna-N |
| Port Restrictor Plugs | None |
| Port T Pressure Rating | 1000 psi |
| NFPA Size | D05 |
| Electrical Options | None |
| Weight | 10.0 LB |
