Find a Service Center
- D05 Single Solenoid Operated Valve
- 48 VDC
- Ground Terminal
- No Coil
- 2-Position Spring Offset
description
- DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
- Port connections are made by mounting the valve on a manifold or subplate containing the interface.
- Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Crossover | All Ports Blocked |
| Coil Type | No Coil |
| Pilot Valve Type | N/A |
| Electrical Options Code | None |
| Coil Rating Code | None |
| Electrical Connection | Ground Terminal |
| Port Restrictor Plugs | None |
| AC/DC | DC |
| Function | 2-Position Spring Offset |
| Center Position | All Ports Blocked |
| Voltage & Frequency | 48 VDC |
| Pressure [Max] | 3000 psi |
| Seal Material | Buna-N |
| Flow Direction Code | 4 |
| Surge Suppressor/Damper | None |
| NFPA Size | D05 |
| Mechanical Options | None |
| Cycle Rate [Max] | N/A |
| Design No. | 50 |
| Spool Code | 2 |
| Rated Flow [Max] | 20 gal/min |
| Valve Type | Standard-Duty |
| Actuator Type | Solenoid |
| Pressure Port Check Valve Pressure | N/A |
| Operation | Solenoid Operated |
| Solenoid | Single |
| Overrides | No Overrides |
| Indicator Lights | No |
| Pilot/Drain | None |
| Reducer Module | N/A |
| Mechanical Options Code | None |
| Solenoid Air Gap Code | None |
| Electrical Options | None |
| Port T Pressure Rating | 1000 psi |
| Response Type | Standard Response |
| Spool Spring Arrangement Code | A |
| Weight | 10.0 LB |
