Find a Service Center
- D05 Single Solenoid Operated Valve
- 48 VDC
- Ground Terminal
- No Coil
- 2-Position Spring Offset
description
- DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
- Port connections are made by mounting the valve on a manifold or subplate containing the interface.
- Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Reducer Module | N/A |
| Electrical Options | None |
| Valve Type | Standard-Duty |
| Crossover | All Ports Blocked |
| Port Restrictor Plugs | None |
| Indicator Lights | No |
| Rated Flow [Max] | 20 gal/min |
| Coil Rating Code | None |
| Cycle Rate [Max] | N/A |
| Operation | Solenoid Operated |
| NFPA Size | D05 |
| Solenoid | Single |
| Coil Type | No Coil |
| Function | 2-Position Spring Offset |
| Pressure Port Check Valve Pressure | N/A |
| Electrical Options Code | None |
| Center Position | All Ports Blocked |
| Overrides | No Overrides |
| Pressure [Max] | 3000 psi |
| Surge Suppressor/Damper | None |
| Spool Spring Arrangement Code | A |
| Actuator Type | Solenoid |
| Electrical Connection | Ground Terminal |
| Mechanical Options | None |
| Voltage & Frequency | 48 VDC |
| Pilot Valve Type | N/A |
| Port T Pressure Rating | 1000 psi |
| Response Type | Standard Response |
| Seal Material | Buna-N |
| Spool Code | 2 |
| Design No. | 50 |
| Mechanical Options Code | None |
| Flow Direction Code | 4 |
| Pilot/Drain | None |
| AC/DC | DC |
| Solenoid Air Gap Code | None |
| Weight | 10.0 LB |
