Find a Service Center
- D05 Double Solenoid Operated Valve
- 230 VAC - 50 Hz
- Ground Terminal
- No Coil
- 3-Position Spring Centered
description
- DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
- Port connections are made by mounting the valve on a manifold or subplate containing the interface.
- Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Pressure Port Check Valve Pressure | N/A |
| NFPA Size | D05 |
| Cycle Rate [Max] | N/A |
| Mechanical Options | None |
| Electrical Connection | Ground Terminal |
| Voltage & Frequency | 230 VAC – 50 Hz |
| Pilot Valve Type | N/A |
| Spool Code | 6 |
| Solenoid Air Gap Code | None |
| Overrides | No Overrides |
| Pressure [Max] | 3000 psi |
| Rated Flow [Max] | 20 gal/min |
| Port Restrictor Plugs | None |
| Seal Material | Buna-N |
| Electrical Options | None |
| Spool Spring Arrangement Code | C |
| Actuator Type | Solenoid |
| Reducer Module | N/A |
| Design No. | 50 |
| Mechanical Options Code | None |
| Function | 3-Position Spring Centered |
| Pilot/Drain | None |
| Solenoid | Double |
| Electrical Options Code | None |
| Center Position | P Blocked, A & B to T |
| Flow Direction Code | 4 |
| Coil Rating Code | None |
| Indicator Lights | No |
| Operation | Solenoid Operated |
| Crossover | P Blocked, A or B to T |
| Valve Type | Standard-Duty |
| Surge Suppressor/Damper | None |
| AC/DC | AC |
| Coil Type | No Coil |
| Port T Pressure Rating | 1000 psi |
| Response Type | Standard Response |
| Weight | 10.0 LB |
