Find a Service Center
- D05 Double Solenoid Operated Valve
- 230 VAC - 50 Hz
- Ground Terminal
- No Coil
- 3-Position Spring Centered
description
- DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
- Port connections are made by mounting the valve on a manifold or subplate containing the interface.
- Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Response Type | Standard Response |
| AC/DC | AC |
| Port Restrictor Plugs | None |
| Electrical Connection | Ground Terminal |
| Solenoid | Double |
| Solenoid Air Gap Code | None |
| Cycle Rate [Max] | N/A |
| NFPA Size | D05 |
| Overrides | No Overrides |
| Electrical Options | None |
| Rated Flow [Max] | 20 gal/min |
| Coil Rating Code | None |
| Function | 3-Position Spring Centered |
| Pressure [Max] | 3000 psi |
| Mechanical Options Code | None |
| Electrical Options Code | None |
| Spool Spring Arrangement Code | C |
| Voltage & Frequency | 230 VAC – 50 Hz |
| Center Position | P Blocked, A & B to T |
| Design No. | 50 |
| Valve Type | Standard-Duty |
| Surge Suppressor/Damper | None |
| Indicator Lights | No |
| Flow Direction Code | 4 |
| Coil Type | No Coil |
| Pressure Port Check Valve Pressure | N/A |
| Actuator Type | Solenoid |
| Pilot/Drain | None |
| Operation | Solenoid Operated |
| Seal Material | Buna-N |
| Pilot Valve Type | N/A |
| Port T Pressure Rating | 1000 psi |
| Spool Code | 6 |
| Mechanical Options | None |
| Reducer Module | N/A |
| Crossover | P Blocked, A or B to T |
| Weight | 10.0 LB |
