DG5V-8 models are two-stage directional control valves having an integrally-mounted wet armature solenoid pilot valve. These valves are generally used to control the movement of a work cylinder or the rotation of a fluid motor.
caution
Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
Operation
Pilot Operated
Valve Type
Standard-Duty
Response Type Code
None
Spool Code
0
Seal Material
Buna-N
Pilot Valve Type Code
S
Indicator Lights
Yes
Pilot Valve Type
CETOP 3, Standard Performance
Pilot Pressure Code
E
Port Restrictor Plugs
None
Function
3-Position Spring Centered
Mechanical Options
None
Voltage & Frequency
110/120 VAC – 50/60 Hz
Response Type
Standard Response
Port Restrictor Plug Code
None
Housing Code
W
Pressure [Max]
5000 psi
Spool Spring Arrangement Code
C
Actuator Type
Solenoid
Pressure Port Check Valve Pressure
N/A
Electrical Options Code
None
Crossover
All Ports Open
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Rated Flow [Max]
185 gal/min
Pilot/Drain
External Pilot/External Drain
Pilot Drain Code
None
Spool Control Modification Code
None
Surge Suppressor/Damper
None
Design No.
10
AC/DC
AC
Solenoid Indicator Lights Code
L
Electrical Options
None
EN Code
None
Mechanical Options Code
None
Spool Indicator Switch Code
None
Gauge Ports Code
None
Coil Rating Code
B
Gauge Port
SAE-4
Manual Override Option Code
None
Coil Type Code
F
Electrical Connector Code
PA5
Port T Pressure Rating
5000 psi
Reducer Module
N/A
Solenoid Energization Code
None
Electrical Connection
Five Pin Connector
Overrides
Plain Override Solenoid Ends
Surge Suppressor/Damper Code
None
Solenoid
Double
Center Position
All Ports Open
Reducer Module Code
None
NFPA Size
D08
Pressure Port Check Valve Code
None
Weight
35.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
