DG5V-8 models are two-stage directional control valves having an integrally-mounted wet armature solenoid pilot valve. These valves are generally used to control the movement of a work cylinder or the rotation of a fluid motor.
caution
Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
Reducer Module
N/A
Port Restrictor Plug Code
None
Electrical Connection
Five Pin Connector
Coil Rating Code
B
Spool Spring Arrangement Code
C
Mechanical Options Code
None
Operation
Pilot Operated
Design No.
10
Coil Type Code
F
Actuator Type
Solenoid
Rated Flow [Max]
185 gal/min
Spool Control Modification Code
None
AC/DC
AC
Overrides
Plain Override Solenoid Ends
Spool Code
0
Response Type
Standard Response
Seal Material
Buna-N
Electrical Connector Code
PA5
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Port Restrictor Plugs
None
Pressure Port Check Valve Pressure
N/A
Pressure Port Check Valve Code
None
Function
3-Position Spring Centered
Voltage & Frequency
110/120 VAC – 50/60 Hz
Crossover
All Ports Open
Pilot Valve Type Code
S
Center Position
All Ports Open
Port T Pressure Rating
5000 psi
Surge Suppressor/Damper Code
None
Pilot Valve Type
CETOP 3, Standard Performance
Solenoid Indicator Lights Code
L
Indicator Lights
Yes
Pressure [Max]
5000 psi
Valve Type
Standard-Duty
Pilot/Drain
External Pilot/External Drain
Manual Override Option Code
None
Solenoid
Double
Pilot Drain Code
None
EN Code
None
Pilot Pressure Code
E
Reducer Module Code
None
NFPA Size
D08
Gauge Port
SAE-4
Housing Code
W
Gauge Ports Code
None
Electrical Options
None
Electrical Options Code
None
Response Type Code
None
Solenoid Energization Code
None
Mechanical Options
None
Surge Suppressor/Damper
None
Spool Indicator Switch Code
None
Weight
35.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
