These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Port T Pressure Rating
3000 psi
Voltage & Frequency
110/120 VAC – 50/60 Hz
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Surge Suppressor/Damper
None
Design No.
60
Pilot/Drain
None
Function
2-Position Spring Offset, End to Center
Solenoid
Single
AC/DC
AC
Housing Code
W
Operation
Solenoid Operated
Electrical Connector Code
T
Solenoid Energization Code
None
Center Position
P Blocked, A & B to T
Overrides
No Overrides
Function Code
6
Indicator Lights
Yes
Seal Material
Buna-N
Response Type
Standard Response
Electrical Options
None
Spool Indicator Switch Code
None
Spool Code
6
Mechanical Options
None
Spool Spring Arrangement Code
B
EN Code
None
Port Restrictor Plug Code
None
Rated Flow [Max]
21 gal/min
Pressure [Max]
5075 psi
Solenoid Indicator Lights Code
L
Port T Code
6
Pressure Port Check Valve Pressure
N/A
Manual Override Option Code
H
Solenoid Code
B
NFPA Size
D03
Coil Rating Code
B
Actuator Type
Solenoid
Coil Type Code
F
Valve Type
High-Performance
Spool Shift Timing
N/A
Pilot Valve Type
N/A
Surge Suppressor/Damper Code
None
Cycle Rate [Max]
N/A
Electrical Connection
Wired Terminal Block
Port Restrictor Plugs
None
Reducer Module
N/A
Crossover
P Blocked, A or B to T
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back