These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Indicator Lights
Yes
Solenoid Indicator Lights Code
L
Overrides
No Overrides
Coil Type Code
F
Pilot Valve Type
N/A
Center Position
P Blocked, A & B to T
Port Restrictor Plugs
None
Port T Pressure Rating
3000 psi
AC/DC
AC
Pressure [Max]
5075 psi
Electrical Connection
Wired Terminal Block
Voltage & Frequency
110/120 VAC – 50/60 Hz
Rated Flow [Max]
21 gal/min
Response Type
Standard Response
EN Code
None
Coil Rating Code
B
Design No.
60
Function
2-Position Spring Offset, End to Center
Actuator Type
Solenoid
Manual Override Option Code
H
Housing Code
W
Electrical Options
None
Reducer Module
N/A
Mechanical Options
None
Spool Indicator Switch Code
None
Solenoid Energization Code
None
Operation
Solenoid Operated
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Cycle Rate [Max]
N/A
Pilot/Drain
None
Pressure Port Check Valve Pressure
N/A
Function Code
6
Seal Material
Buna-N
Crossover
P Blocked, A or B to T
Spool Code
6
Port Restrictor Plug Code
None
NFPA Size
D03
Solenoid Code
B
Electrical Connector Code
T
Port T Code
6
Solenoid
Single
Spool Spring Arrangement Code
B
Valve Type
High-Performance
Surge Suppressor/Damper
None
Spool Shift Timing
N/A
Surge Suppressor/Damper Code
None
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back