These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Coil Type
DIN 43650
Housing Code
None
Spool Indicator Switch Code
None
Manual Override Option Code
H
Electrical Connector Code
None
Voltage & Frequency
110/120 VAC – 50/60 Hz, Low Power Coil
Coil Rating Code
BL
Electrical Connection
DIN 43650
Mechanical Options
None
Solenoid Energization Code
V
Port T Pressure Rating
3000 psi
Function
3-Position Spring Centered
Pilot/Drain
None
Crossover
P Blocked, A or B to T
Spool Code
6
NFPA Size
D03
Pilot Valve Type
N/A
Surge Suppressor/Damper
None
Design No.
60
Solenoid
Double
Port Restrictor Plugs
None
Response Type
Standard Response
Coil Type Code
U
Spool Spring Arrangement Code
C
Port Restrictor Plug Code
None
Reducer Module
N/A
Solenoid Code
BL
Pressure [Max]
5075 psi
Cycle Rate [Max]
N/A
Surge Suppressor/Damper Code
None
Spool Shift Timing
N/A
Electrical Options
None
Port T Code
6
Solenoid Indicator Lights Code
None
Valve Type
High-Performance
Rated Flow [Max]
21 gal/min
Actuator Type
Solenoid
EN Code
None
Overrides
No Overrides
Function Code
6
AC/DC
AC
Indicator Lights
No
Operation
Solenoid Operated
Pressure Port Check Valve Pressure
N/A
Center Position
P Blocked, A & B to T
Seal Material
Buna-N
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
