These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Reducer Module
N/A
Port Restrictor Plug Code
None
AC/DC
AC
Pilot Valve Type
N/A
Solenoid
Double
Response Type
Standard Response
Pressure Port Check Valve Pressure
N/A
Rated Flow [Max]
21 gal/min
NFPA Size
D03
Electrical Connection
DIN 43650
Valve Type
High-Performance
Operation
Solenoid Operated
Function Code
6
Solenoid Code
BL
Port T Pressure Rating
3000 psi
Actuator Type
Solenoid
Coil Type
DIN 43650
Electrical Options
None
Surge Suppressor/Damper
None
Electrical Connector Code
None
Surge Suppressor/Damper Code
None
Overrides
No Overrides
Mechanical Options
None
Coil Rating Code
BL
Spool Shift Timing
N/A
Crossover
P Blocked, A or B to T
Solenoid Energization Code
V
Indicator Lights
No
Manual Override Option Code
H
Pressure [Max]
5075 psi
Center Position
P Blocked, A & B to T
Seal Material
Buna-N
Function
3-Position Spring Centered
Voltage & Frequency
110/120 VAC – 50/60 Hz, Low Power Coil
Design No.
60
Port T Code
6
Port Restrictor Plugs
None
Housing Code
None
Cycle Rate [Max]
N/A
EN Code
None
Pilot/Drain
None
Spool Code
6
Coil Type Code
U
Solenoid Indicator Lights Code
None
Spool Indicator Switch Code
None
Spool Spring Arrangement Code
C
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
