These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Pressure [Max]
5075 psi
NFPA Size
D03
Spool Indicator Switch Code
None
Crossover
P Blocked, A or B to T
Response Type
Standard Response
Solenoid
Double
Spool Shift Timing
N/A
Coil Type Code
F
Reducer Module
N/A
Surge Suppressor/Damper
None
Cycle Rate [Max]
N/A
Function Code
6
Voltage & Frequency
12 VDC
Electrical Connector Code
None
Spool Spring Arrangement Code
N
Port T Code
7
Mechanical Options
None
EN Code
None
Solenoid Energization Code
None
Valve Type
High-Performance
Housing Code
W
Surge Suppressor/Damper Code
None
Spool Code
6
Port Restrictor Plug Code
None
Design No.
60
Center Position
P Blocked, A & B to T
Indicator Lights
No
Pilot/Drain
None
Pilot Valve Type
N/A
Manual Override Option Code
H
Solenoid Indicator Lights Code
None
Electrical Options
None
Solenoid Code
G
Rated Flow [Max]
21 gal/min
Function
3-Position Detented
Seal Material
Buna-N
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Operation
Solenoid Operated
Actuator Type
Solenoid
AC/DC
DC
Electrical Connection
No Connector
Port Restrictor Plugs
None
Coil Rating Code
G
Port T Pressure Rating
3000 psi
Pressure Port Check Valve Pressure
N/A
Overrides
No Overrides
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
