These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Reducer Module
N/A
Spool Shift Timing
N/A
Electrical Connector Code
None
Surge Suppressor/Damper
None
Coil Rating Code
G
Center Position
P Blocked, A & B to T
Pressure [Max]
5075 psi
Mechanical Options
None
Port T Pressure Rating
3000 psi
Overrides
No Overrides
Port T Code
7
Function Code
6
Manual Override Option Code
H
Electrical Connection
No Connector
Coil Type Code
F
Spool Spring Arrangement Code
N
Solenoid Code
G
AC/DC
DC
Port Restrictor Plugs
None
Rated Flow [Max]
21 gal/min
Solenoid Energization Code
None
Spool Indicator Switch Code
None
Solenoid
Double
NFPA Size
D03
Operation
Solenoid Operated
Crossover
P Blocked, A or B to T
Design No.
60
Surge Suppressor/Damper Code
None
Port Restrictor Plug Code
None
Function
3-Position Detented
Pilot/Drain
None
Cycle Rate [Max]
N/A
Valve Type
High-Performance
Response Type
Standard Response
Solenoid Indicator Lights Code
None
Pressure Port Check Valve Pressure
N/A
Spool Code
6
EN Code
None
Housing Code
W
Seal Material
Buna-N
Actuator Type
Solenoid
Voltage & Frequency
12 VDC
Electrical Options
None
Indicator Lights
No
Pilot Valve Type
N/A
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
