These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Seal Material
Buna-N
Rated Flow [Max]
21 gal/min
Spool Shift Timing
N/A
Response Type
Standard Response
Spool Spring Arrangement Code
C
AC/DC
DC
Pilot Valve Type
N/A
Cycle Rate [Max]
N/A
EN Code
None
Crossover
P Blocked, A or B to T
Electrical Options
None
Overrides
No Overrides
Port T Code
7
Mechanical Options
None
Electrical Connection
DIN 43650
Solenoid Indicator Lights Code
None
Pressure Port Check Valve Pressure
N/A
Solenoid Code
H
Solenoid Energization Code
None
Center Position
P Blocked, A & B to T
Coil Rating Code
H
Solenoid
Double
Spool Indicator Switch Code
None
Coil Type
DIN 43650
Spool Code
66
Coil Type Code
U
Pilot/Drain
None
Housing Code
None
Pressure [Max]
5075 psi
Port Restrictor Plug Code
None
Function
3-Position Spring Centered
Reducer Module
N/A
Surge Suppressor/Damper
None
Manual Override Option Code
None
Design No.
60
Operation
Solenoid Operated
NFPA Size
D03
Voltage & Frequency
24 VDC
Actuator Type
Solenoid
Port Restrictor Plugs
None
Electrical Connector Code
None
Port T Pressure Rating
3000 psi
Surge Suppressor/Damper Code
None
Indicator Lights
No
Function Code
66
Valve Type
High-Performance
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
