These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Function
3-Position Spring Centered
Port Restrictor Plug Code
None
Cycle Rate [Max]
N/A
Coil Rating Code
H
Design No.
60
Overrides
No Overrides
Reducer Module
N/A
Pressure [Max]
5075 psi
Housing Code
None
Operation
Solenoid Operated
Spool Spring Arrangement Code
C
Rated Flow [Max]
21 gal/min
Pilot Valve Type
N/A
Seal Material
Buna-N
Port T Code
7
Port T Pressure Rating
3000 psi
Surge Suppressor/Damper
None
Response Type
Standard Response
Coil Type
DIN 43650
Solenoid Energization Code
None
Solenoid
Double
Voltage & Frequency
24 VDC
Valve Type
High-Performance
Mechanical Options
None
Coil Type Code
U
Port Restrictor Plugs
None
Electrical Connector Code
None
Indicator Lights
No
Pressure Port Check Valve Pressure
N/A
Manual Override Option Code
None
Solenoid Code
H
Surge Suppressor/Damper Code
None
Pilot/Drain
None
NFPA Size
D03
Spool Code
66
Actuator Type
Solenoid
Function Code
66
Electrical Connection
DIN 43650
Spool Shift Timing
N/A
Solenoid Indicator Lights Code
None
Center Position
P Blocked, A & B to T
EN Code
None
AC/DC
DC
Electrical Options
None
Crossover
P Blocked, A or B to T
Spool Indicator Switch Code
None
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
