These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Valve Type
High-Performance
EN Code
None
Port T Code
7
Port Restrictor Plugs
None
Spool Code
2
Seal Material
Buna-N
Housing Code
W
Coil Rating Code
HL
Voltage & Frequency
24 VDC, Low Power Coil
Manual Override Option Code
None
Spool Indicator Switch Code
None
Spool Shift Timing
N/A
Solenoid Energization Code
None
Function
3-Position Spring Centered
Pressure Port Check Valve Pressure
N/A
Crossover
All Ports Blocked
Indicator Lights
Yes
Rated Flow [Max]
21 gal/min
Port T Pressure Rating
3000 psi
Pressure [Max]
5075 psi
Operation
Solenoid Operated
Reducer Module
N/A
Solenoid
Double
Overrides
No Overrides
Electrical Options
None
Electrical Connection
Wired Terminal Block
Center Position
All Ports Blocked
Response Type
Standard Response
Spool Spring Arrangement Code
C
Mechanical Options
None
Coil Type Code
F
Function Code
2
NFPA Size
D03
Surge Suppressor/Damper
Encapsulated Transzorb
Cycle Rate [Max]
N/A
Actuator Type
Solenoid
Solenoid Indicator Lights Code
L
Pilot Valve Type
N/A
Electrical Connector Code
T
Surge Suppressor/Damper Code
D7
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Pilot/Drain
None
Design No.
60
Port Restrictor Plug Code
None
AC/DC
DC
Solenoid Code
HL
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back