These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Solenoid Code
HL
Solenoid
Double
Indicator Lights
Yes
Port Restrictor Plugs
None
Cycle Rate [Max]
N/A
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Design No.
60
EN Code
None
Solenoid Energization Code
None
Voltage & Frequency
24 VDC, Low Power Coil
Port T Pressure Rating
3000 psi
Function Code
2
Overrides
No Overrides
Function
3-Position Spring Centered
Spool Spring Arrangement Code
C
Solenoid Indicator Lights Code
L
Spool Indicator Switch Code
None
Spool Shift Timing
N/A
Surge Suppressor/Damper Code
D7
AC/DC
DC
Pressure [Max]
5075 psi
Electrical Connector Code
T
Pilot/Drain
None
Operation
Solenoid Operated
Center Position
All Ports Blocked
Coil Type Code
F
Electrical Options
None
Coil Rating Code
HL
Reducer Module
N/A
Valve Type
High-Performance
Response Type
Standard Response
Seal Material
Buna-N
Port T Code
7
Manual Override Option Code
None
Electrical Connection
Wired Terminal Block
Rated Flow [Max]
21 gal/min
Pressure Port Check Valve Pressure
N/A
Spool Code
2
Actuator Type
Solenoid
Surge Suppressor/Damper
Encapsulated Transzorb
Crossover
All Ports Blocked
NFPA Size
D03
Mechanical Options
None
Housing Code
W
Pilot Valve Type
N/A
Port Restrictor Plug Code
None
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back