These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Pressure Port Check Valve Pressure
N/A
Function Code
0
Spool Code
0
Port T Code
6
Electrical Connector Code
None
Seal Material
Buna-N
Coil Rating Code
B
Manual Override Option Code
None
Crossover
All Ports Open
Pressure [Max]
5075 psi
Center Position
All Ports Open
Reducer Module
N/A
Solenoid Indicator Lights Code
None
Surge Suppressor/Damper
None
Actuator Type
Solenoid
Mechanical Options
None
Pilot/Drain
None
Port Restrictor Plug Code
P10
Port T Pressure Rating
3000 psi
Solenoid Energization Code
None
Surge Suppressor/Damper Code
None
Coil Type
DIN 43650
Pilot Valve Type
N/A
Solenoid Code
B
EN Code
EN21
Function
2-Position Spring Offset, End to Center
Response Type
Standard Response
Overrides
No Overrides
Voltage & Frequency
110/120 VAC – 50/60 Hz
Solenoid
Single
Valve Type
High-Performance
NFPA Size
D03
Operation
Solenoid Operated
Indicator Lights
No
AC/DC
AC
Port Restrictor Plugs
1 mm Diameter - P Port
Spool Shift Timing
N/A
Spool Spring Arrangement Code
BL
Cycle Rate [Max]
N/A
Coil Type Code
U
Spool Indicator Switch Code
None
Electrical Connection
DIN 43650
Housing Code
None
Design No.
60
Rated Flow [Max]
21 gal/min
Electrical Options
None
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
