These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Actuator Type
Solenoid
Spool Indicator Switch Code
None
Surge Suppressor/Damper Code
None
NFPA Size
D03
Electrical Options
None
Reducer Module
N/A
Rated Flow [Max]
21 gal/min
EN Code
EN21
Mechanical Options
None
Solenoid
Single
Pilot/Drain
None
Overrides
No Overrides
Voltage & Frequency
110/120 VAC – 50/60 Hz
Function Code
0
Pressure Port Check Valve Pressure
N/A
Solenoid Indicator Lights Code
None
Operation
Solenoid Operated
Pressure [Max]
5075 psi
AC/DC
AC
Coil Type Code
U
Spool Spring Arrangement Code
BL
Valve Type
High-Performance
Seal Material
Buna-N
Center Position
All Ports Open
Housing Code
None
Pilot Valve Type
N/A
Port Restrictor Plug Code
P10
Spool Shift Timing
N/A
Function
2-Position Spring Offset, End to Center
Surge Suppressor/Damper
None
Coil Rating Code
B
Port T Pressure Rating
3000 psi
Solenoid Code
B
Cycle Rate [Max]
N/A
Port Restrictor Plugs
1 mm Diameter - P Port
Indicator Lights
No
Solenoid Energization Code
None
Coil Type
DIN 43650
Design No.
60
Spool Code
0
Manual Override Option Code
None
Port T Code
6
Crossover
All Ports Open
Response Type
Standard Response
Electrical Connection
DIN 43650
Electrical Connector Code
None
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
