These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Voltage & Frequency
24 VDC
EN Code
None
Surge Suppressor/Damper Code
None
Spool Spring Arrangement Code
C
Rated Flow [Max]
21 gal/min
Coil Type Code
F
Spool Code
0
Pilot Valve Type
N/A
Manual Override Option Code
None
Electrical Connector Code
PA5
Housing Code
W
Crossover
All Ports Open
Reducer Module
N/A
AC/DC
DC
Pressure Port Check Valve Pressure
N/A
Port Restrictor Plug Code
None
Function
3-Position Spring Centered
Operation
Solenoid Operated
Mechanical Options
None
Overrides
No Overrides
Spool Indicator Switch Code
None
Response Type
Standard Response
Spool Shift Timing
N/A
Port T Code
7
Valve Type
High-Performance
Solenoid
Double
Actuator Type
Solenoid
Pressure [Max]
5075 psi
NFPA Size
D03
Center Position
All Ports Open
Cycle Rate [Max]
N/A
Seal Material
Buna-N
Design No.
60
Pilot/Drain
None
Solenoid Indicator Lights Code
L
Coil Rating Code
H
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Solenoid Code
H
Indicator Lights
Yes
Surge Suppressor/Damper
None
Electrical Connection
Five Pin Connector
Function Code
0
Port T Pressure Rating
3000 psi
Solenoid Energization Code
None
Electrical Options
None
Port Restrictor Plugs
None
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
