These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Function Code
0
Manual Override Option Code
None
NFPA Size
D03
Solenoid Code
H
Pilot/Drain
None
Port Restrictor Plugs
None
Pilot Valve Type
N/A
Spool Indicator Switch Code
None
Response Type
Standard Response
Solenoid Energization Code
None
Voltage & Frequency
24 VDC
Port Restrictor Plug Code
None
Crossover
All Ports Open
Rated Flow [Max]
21 gal/min
Solenoid Indicator Lights Code
L
Valve Type
High-Performance
Electrical Connection
Five Pin Connector
Function
3-Position Spring Centered
Operation
Solenoid Operated
Surge Suppressor/Damper
None
Mechanical Options
None
Reducer Module
N/A
Actuator Type
Solenoid
Design No.
60
Spool Spring Arrangement Code
C
EN Code
None
Pressure Port Check Valve Pressure
N/A
AC/DC
DC
Center Position
All Ports Open
Pressure [Max]
5075 psi
Overrides
No Overrides
Electrical Options
None
Port T Pressure Rating
3000 psi
Electrical Connector Code
PA5
Seal Material
Buna-N
Coil Rating Code
H
Spool Code
0
Spool Shift Timing
N/A
Coil Type Code
F
Housing Code
W
Port T Code
7
Surge Suppressor/Damper Code
None
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Solenoid
Double
Cycle Rate [Max]
N/A
Indicator Lights
Yes
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
