These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Operation
Solenoid Operated
Overrides
No Overrides
Rated Flow [Max]
21 gal/min
Port Restrictor Plug Code
None
Center Position
P to T, A & B Blocked
Surge Suppressor/Damper Code
None
Electrical Connection
No Connector
Pressure Port Check Valve Pressure
N/A
Port Restrictor Plugs
None
Design No.
61
Housing Code
None
Electrical Options
None
Port T Pressure Rating
3000 psi
Function Code
8
Manual Override Option Code
H
Spool Spring Arrangement Code
C
Indicator Lights
No
Actuator Type
Solenoid
Solenoid Energization Code
V
Spool Shift Timing
N/A
Pilot Valve Type
N/A
Solenoid Code
G
NFPA Size
D03
AC/DC
DC
Pressure [Max]
5075 psi
Function
3-Position Spring Centered
Surge Suppressor/Damper
None
Solenoid
Double
Crossover
All Ports Open, Restricted
Voltage & Frequency
12 VDC
Coil Rating Code
G
Coil Type
Dual 6.3 mm Spade
Reducer Module
N/A
Pilot/Drain
None
Cycle Rate [Max]
N/A
Spool Indicator Switch Code
None
Solenoid Indicator Lights Code
None
Mechanical Options
None
Response Type
Standard Response
Coil Type Code
SP2
Seal Material
Buna-N
Electrical Connector Code
None
Port T Code
7
Valve Type
High-Performance
EN Code
None
Spool Code
8
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
