These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Surge Suppressor/Damper Code
None
Spool Code
8
Pilot/Drain
None
NFPA Size
D03
Function Code
8
Indicator Lights
No
Port Restrictor Plugs
None
Spool Shift Timing
N/A
Rated Flow [Max]
21 gal/min
Port T Code
7
Valve Type
High-Performance
Cycle Rate [Max]
N/A
AC/DC
DC
Coil Type
Dual 6.3 mm Spade
Seal Material
Buna-N
Pilot Valve Type
N/A
Surge Suppressor/Damper
None
Electrical Options
None
Reducer Module
N/A
Pressure Port Check Valve Pressure
N/A
Design No.
61
Port T Pressure Rating
3000 psi
Coil Type Code
SP2
Overrides
No Overrides
Electrical Connector Code
None
Solenoid
Double
EN Code
None
Voltage & Frequency
12 VDC
Response Type
Standard Response
Spool Indicator Switch Code
None
Pressure [Max]
5075 psi
Manual Override Option Code
H
Coil Rating Code
G
Port Restrictor Plug Code
None
Mechanical Options
None
Operation
Solenoid Operated
Solenoid Code
G
Center Position
P to T, A & B Blocked
Housing Code
None
Crossover
All Ports Open, Restricted
Solenoid Energization Code
V
Function
3-Position Spring Centered
Spool Spring Arrangement Code
C
Electrical Connection
No Connector
Actuator Type
Solenoid
Solenoid Indicator Lights Code
None
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
