These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Function
3-Position Detented
Pilot/Drain
None
Pressure Port Check Valve Pressure
N/A
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Pilot Valve Type
N/A
Voltage & Frequency
24 VDC
Reducer Module
N/A
Pressure [Max]
5075 psi
Valve Type
High-Performance
Seal Material
Buna-N
Coil Rating Code
H
Cycle Rate [Max]
N/A
Rated Flow [Max]
21 gal/min
NFPA Size
D03
Spool Code
6
Electrical Options
None
Mechanical Options
None
Surge Suppressor/Damper Code
None
Spool Shift Timing
N/A
Function Code
6
Surge Suppressor/Damper
None
Manual Override Option Code
None
Indicator Lights
Yes
Coil Type Code
F
AC/DC
DC
Solenoid
Double
Solenoid Code
H
Electrical Connection
Wired Terminal Block
Spool Indicator Switch Code
None
Crossover
P Blocked, A or B to T
Port T Pressure Rating
3000 psi
Response Type
Standard Response
Solenoid Indicator Lights Code
L
Housing Code
W
Port Restrictor Plug Code
None
Operation
Solenoid Operated
Spool Spring Arrangement Code
N
Port T Code
7
Solenoid Energization Code
None
Port Restrictor Plugs
None
EN Code
None
Center Position
P Blocked, A & B to T
Electrical Connector Code
T
Overrides
No Overrides
Actuator Type
Solenoid
Design No.
60
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
