These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
EN Code
None
Design No.
60
Surge Suppressor/Damper
None
Pressure Port Check Valve Pressure
N/A
Solenoid Code
H
AC/DC
DC
Overrides
No Overrides
Surge Suppressor/Damper Code
None
Valve Type
High-Performance
Manual Override Option Code
None
Spool Shift Timing
N/A
Seal Material
Buna-N
Response Type
Standard Response
Electrical Connector Code
T
Center Position
P Blocked, A & B to T
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Pilot/Drain
None
Function Code
6
Operation
Solenoid Operated
NFPA Size
D03
Spool Spring Arrangement Code
N
Electrical Connection
Wired Terminal Block
Solenoid Indicator Lights Code
L
Function
3-Position Detented
Solenoid Energization Code
None
Pilot Valve Type
N/A
Pressure [Max]
5075 psi
Housing Code
W
Port T Code
7
Mechanical Options
None
Port Restrictor Plugs
None
Indicator Lights
Yes
Rated Flow [Max]
21 gal/min
Spool Indicator Switch Code
None
Voltage & Frequency
24 VDC
Reducer Module
N/A
Actuator Type
Solenoid
Cycle Rate [Max]
N/A
Coil Rating Code
H
Electrical Options
None
Coil Type Code
F
Port T Pressure Rating
3000 psi
Port Restrictor Plug Code
None
Solenoid
Double
Spool Code
6
Crossover
P Blocked, A or B to T
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
