
- Solenoid Actuated Valve
- Solenoid Operated Operation
- D05 NFPA Size
- Single Solenoid
- 2-Position Spring Centered, End to Center, Single End Function
description
- DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
- Port connections are made by mounting the valve on a manifold or subplate containing the interface.
- Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
Mechanical Options | None |
Spool Code | 2 |
Flow Direction Code | 4 |
Reducer Module | N/A |
Seal Material | Buna-N |
Design No. | 60 |
Valve Type | Standard-Duty |
NFPA Size | D05 |
Pilot/Drain | None |
Coil Rating Code | D |
AC/DC | AC |
Pressure Port Check Valve Pressure | N/A |
Tank Port Rating | 1000 |
Electrical Connection | DIN 43650 |
Center Position | All Ports Blocked |
Pilot Valve Type | N/A |
Indicator Lights | No |
Overrides | No Overrides |
Actuator Type | Solenoid |
Cycle Rate [Max] | N/A |
Coil Type | ISO 4400 (Din 43650) Connector |
Operation | Solenoid Operated |
Electrical Options Code | None |
Electrical Options | None |
Crossover | All Ports Blocked |
Port Restrictor Plugs | None |
Surge Suppressor/Damper | None |
Voltage & Frequency | 220 VAC - 50 Hz |
Rated Flow [Max] | 25 gal/min |
Response Type | Standard Response |
Solenoid | Single |
Coil Type Code | U |
Function | 2-Position Spring Centered, End to Center, Single End |
Model No. | DG4S4-012B-U-D-60 |
Pressure [Max] | 3600 psi |
Mechanical Options Code | None |
Port T Pressure Rating | 1000 psi |
Spool Spring Arrangement Code | B |
Weight | 10.0 LB |
