
- Solenoid Actuated Valve
- Solenoid Operated Operation
- D05 NFPA Size
- Single Solenoid
- 2-Position Spring Centered, End to Center, Single End Function
description
- DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
- Port connections are made by mounting the valve on a manifold or subplate containing the interface.
- Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
Voltage & Frequency | 220 VAC - 50 Hz |
Pilot Valve Type | N/A |
AC/DC | AC |
Design No. | 60 |
Mechanical Options Code | None |
Response Type | Standard Response |
Valve Type | Standard-Duty |
Port T Pressure Rating | 1000 psi |
Rated Flow [Max] | 25 gal/min |
Coil Type | ISO 4400 (Din 43650) Connector |
Pressure [Max] | 3600 psi |
Electrical Connection | DIN 43650 |
Function | 2-Position Spring Centered, End to Center, Single End |
Flow Direction Code | 4 |
Cycle Rate [Max] | N/A |
Coil Type Code | U |
Seal Material | Buna-N |
Electrical Options | None |
Crossover | All Ports Blocked |
Surge Suppressor/Damper | None |
Model No. | DG4S4-012B-U-D-60 |
Pressure Port Check Valve Pressure | N/A |
Electrical Options Code | None |
Reducer Module | N/A |
Actuator Type | Solenoid |
Spool Code | 2 |
Overrides | No Overrides |
Spool Spring Arrangement Code | B |
Mechanical Options | None |
Pilot/Drain | None |
Port Restrictor Plugs | None |
Indicator Lights | No |
Tank Port Rating | 1000 |
Operation | Solenoid Operated |
Coil Rating Code | D |
Solenoid | Single |
NFPA Size | D05 |
Center Position | All Ports Blocked |
Weight | 10.0 LB |
