These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Design No.
60
Manual Override Option Code
None
Mechanical Options
None
Surge Suppressor/Damper
None
Spool Code
66
Solenoid Indicator Lights Code
L
Function Code
66
Housing Code
W
Overrides
No Overrides
Operation
Solenoid Operated
EN Code
None
Pressure Port Check Valve Pressure
N/A
Voltage & Frequency
12 VDC
Actuator Type
Solenoid
Crossover
P Blocked, A or B to T
Spool Spring Arrangement Code
C
Port Restrictor Plug Code
None
Port T Code
7
Spool Indicator Switch Code
None
Solenoid
Double
Port Restrictor Plugs
None
Coil Type Code
F
Valve Type
High-Performance
Coil Rating Code
G
Pilot/Drain
None
Rated Flow [Max]
21 gal/min
Spool Shift Timing
N/A
Solenoid Code
G
Electrical Connector Code
T
Electrical Options
None
AC/DC
DC
Port T Pressure Rating
3000 psi
Surge Suppressor/Damper Code
None
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Function
3-Position Spring Centered
Cycle Rate [Max]
N/A
Seal Material
Buna-N
Indicator Lights
Yes
Pilot Valve Type
N/A
NFPA Size
D03
Solenoid Energization Code
None
Reducer Module
N/A
Response Type
Standard Response
Pressure [Max]
5075 psi
Center Position
P Blocked, A & B to T
Electrical Connection
Wired Terminal Block
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
