These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
EN Code
None
Overrides
No Overrides
Crossover
P Blocked, A or B to T
Cycle Rate [Max]
N/A
Center Position
P Blocked, A & B to T
Indicator Lights
Yes
Pilot Valve Type
N/A
Spool Shift Timing
N/A
Pilot/Drain
None
Solenoid Energization Code
None
Spool Code
66
Coil Rating Code
G
Solenoid Indicator Lights Code
L
Port T Code
7
Port Restrictor Plugs
None
Electrical Connector Code
T
Spool Spring Arrangement Code
C
Surge Suppressor/Damper Code
None
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Solenoid
Double
Mechanical Options
None
Rated Flow [Max]
21 gal/min
Function
3-Position Spring Centered
Port T Pressure Rating
3000 psi
Spool Indicator Switch Code
None
Response Type
Standard Response
Design No.
60
Valve Type
High-Performance
Surge Suppressor/Damper
None
NFPA Size
D03
Actuator Type
Solenoid
Coil Type Code
F
Voltage & Frequency
12 VDC
Manual Override Option Code
None
Port Restrictor Plug Code
None
Operation
Solenoid Operated
Function Code
66
Housing Code
W
Electrical Options
None
Reducer Module
N/A
Electrical Connection
Wired Terminal Block
AC/DC
DC
Pressure Port Check Valve Pressure
N/A
Solenoid Code
G
Seal Material
Buna-N
Pressure [Max]
5075 psi
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
